Mini Logo Hard Bushings Single

Customer Reviews

Made Independent trucks work for me Review by Dom

Rating

I rode Thunder with stock and later with hard Thunder bushings. Switched to Indies: stock bushings way to soft, even the hard Indy bushings didn't feel that different, even tighten the kingpin nut a lot.
Red Mini Logo bushings work great (I'm 190 pounds) and feel completely different in a good way.

But please sell them in sets for both trucks, almost no one needs just bushings for one truck. (Posted on 8/11/2022)

Many local red bushes Review by Armandoerazo23@gmail.com

Rating

Mini logos are the best bushings I love them they're the only ones I write all other bushing swear (Posted on 7/21/2022)

Essential Review by Joe Dean

Rating

I weigh 190lbs and like fairly tight trucks, so Hard Mini-Logos are a must for me. They're the only truly hard bushings I know of with good rebound. Bones and Independent bushings aren't hard enough at 96a, and 100a Doh-Doh's are terrible (zero rebound, turns feel dead). I have these on 3 setups and keep spares in my garage in case of emergency. I'd probably have to retire from skating, if they ever quit making them. (Posted on 4/19/2022)

Great Bushings Review by Cesar Ghiotto aka PatchO

Rating

Very nice and hardest of them all! (Posted on 5/8/2021)

Under rated Review by Tpz

Rating

These and white hard bones are my favorite bushing. These are actually harder. Tip: i recommend cutting the bottom bushing to a conical shape. More responsive and quicker turning. (Posted on 12/25/2019)

Hardest! Review by Joe

Rating

These Mini-Logo bushings are harder than the Independent Super Hard bushings. They fit Indys well and break in relatively quickly. I was really surprised that they were the hardest bushing I have ever rode. (Posted on 5/2/2019)

Awesome Review by Andy

Rating

the urethane seems to perform the same as BONES bushings, but in a standard truck barrel shape. awesome.
(Posted on 4/24/2018)

Perfect Fit for Independent Trucks Review by Don Ellis

Rating

These are great quality and a perfect replacement for Independent trucks. The bushings that come with new trucks are too soft (Medium) for my taste. I have mine on Indy 149 Forged Hollow trucks. Highly recommend for Indy and should fit most trucks. (Posted on 2/1/2018)

Very responsive Review by Larry

Rating

I tend to skate tighter trucks. These have a fair amount of give for maneuvering but then harden up to 'stop' turning before wheelbite occurs on a hard lean or sketchy landing. Just what I look for. Could also loosen the nut for loose and very responsive style and end up with a 'medium' type bushing feel on hard turns. Used to ride doh doh whites that were mostly good but a bit too hard. The minilogo hards are more reasonable without being excessive. (Posted on 12/17/2017)

Really good bushings Review by Aaron

Rating

I got these for my mini logo trucks. They hold my weight pretty good. I'm super impressed with them. Better than Shorty's doh doh's. (Posted on 8/7/2017)